Flexible soft tube manufacturing process
The process of making cosmetic plastic tube is also called tube extension, and the production equipment is called a pipe drawing machine in the factory. The printed rolling sheet goes through the following steps after entering the machine:
1. Trimming: According to the tube diameter to adjust the feeding width of the sheet so as to match the drawing rod.
2, Shaping: The sheet is flat,you have to use a special mold to turn it into roll shape.
3. High-frequency welding:The high-frequency machine starts to work after the tube sheet enters the position of the high-frequency welding knife. Then weld the front and back of the tube sheet together under a proper temperature. At this time, the tube sheet has become round.
4. Cursor Sensing: Use the light cursor to sense the cut pipe mark printed on the material, the machine can distinguish the length of the tube body of each tube. This step is very important.
5. Tube cutting: The last step is to use the cooperation of the cutter and the cursor sensor to cut the welded tube into a product of uniform length.
Welcome to share your comment
